IL2610
BURIED ADJUSTABLE SPOTLIGHT |
|
Max Overall Dimensions: 3.780” (OD) 2.185” (H) (96mm x 55.5)
Trim / Flange Dimensions: 3.780” (OD) x 0.413” (H) (96mm x 10.5mm)
Aperture Diameter: 1.654” (42mm)
Rough-in / Cut out: 3.307” (84mm)
Recess: 1.772” (45mm) allow an additional 4.921”
(125mm) for cable movement
Primary Material: Marine grade Stainless Steel, 316L
Lens Type: Toughened 6mm glass gens
Beam Angle: 17 (min.) – 17 (max.)
Fiber Type: Recommended ILPT 12-75
Rotation: 360°
Max Tilt Angle: +/- 15°
Finishes: Stainless Steel
Ferrule Requirement: 8mm or 10mm Ferrule
Mounting: In ground
Note: IP68, Walk over/ Drive over/ Underwater rated
Spotlight is adjustable for both angular and radial position from above ground without removing luminaire65932424019
Mounting: Surface mount
Notes: IP66, outdoor rated |
|
|
IL2223
EXTERIOR SPOTLIGHT |
|
Max Overall Dimensions: 2.953” (H) x 3.973” (L) (75mm x 100mm)
Trim / Flange Dimensions: 1.260” (OD) 3.740” (H) (32mm x 95mm)
Aperture Diameter: 1.260” (OD) (32mm)
Rough-in / Cut out: Surface mount
Primary Material: Marine grade Stainless Steel 316L
Lens Type: Toughened 6mm glass lens
Beam Angle: +/- 15°
Fiber Type: Recommended ILPT 12-75
Rotation: 360°
Max Tilt Angle: +/- 30°
Finishes: Stainless Steel
Ferrule Requirement: 8mm or 10mm ferrule
Mounting: Surface mount
Notes: IP66, outdoor rated |
|
|
IL1208
MINI PAVER |
|
Max Overall Dimensions: 1.496” (OD) x 2.559” (H) (38mm x 65mm)
Trim / Flange Dimensions: 1.496” (OD) x 0.039” (H) (38mm x 1mm)
Aperture Diameter: 0.669” (17mm)
Rough-in / Cut out: 1.102” (28mm)
Recess: 2.559” (65mm) excluding fiber
Primary Material: Marine grade Stainless Steel 316L
Lens Type: Toughened 6mm cover glass, frosted or clear
Fiber Type: Recommended ILPT 3-75
Finishes: Stainless Steel
Ferrule Requirement: 8mm or 10mm Ferrule
Mounting: Direct bury or use CRE1211 installation tube
Notes: IP68, Walk over/ Drive over/ Underwater rated |
|
|
IL1209
STANDARD PAVER |
|
Max Overall Dimensions: 1.890” (OD) x 3.150” (H) (48mm x 80mm)
Trim / Flange Dimensions: 1.890” (OD) x 0.039” (H) (48mm x 1mm)
Aperture Diameter: 1.063” (27mm)
Rough-in / Cut out: 1.575” (40mm)
Recess: 3.150” (80mm) excluding fiber
Primary Material: Marine grade Stainless Steel 316L
Lens Type: Toughened 6mm cover lens, clear or frosted
Fiber Type: Recommended ILPT 3-75
Finishes: Stainless Steel
Ferrule Requirement: 8mm or 10mm ferrule
Mounting: Direct bury or use CRE2302 spring clip or CRE1212 installation tube
Notes: IP68, Walk over/ Drive over/ Underwater rated |
|
|
IL2329
SQUARE PAVER |
|
Max Overall Dimensions: 1.496” square (OD) x 3.150” (H) (48mm square x 80mm)
Trim / Flange Dimensions: 1.496” square (OD) x 0.059” (H) (48mm square x 1.5mm) Aperture Diameter: 0.945” square (24mm)
Rough-in / Cut out: 1.496” (38mm)
Recess: 3.150” (80mm) excluding fiber
Primary Material: Marine grade Stainless Steel 316L
Lens Type: Toughened 6mm cover lens, frosted or clear
Fiber Type: Recommended ILPT 12-75
Finishes: Stainless Steel
Ferrule Requirement: 8mm or 10mm ferrule
Mounting: Direct bury or use CRE2302 spring clips
or CRE1212 installations tube
Notes: IP68, Walk over/ Drive over/ Underwater rated |